It is a common thing that comes to mind: how to pull a dent out of a car fender, how to pull a dent out of a metal fender. There are two reasons that fender benders happen. The first, and probably most common, is that one driver in a lane isn’t paying attention to what’s going on around them and they slam into another car or some other object around them without realizing it. The second reason happens when two cars pull out from opposite directions at the same time and collide with each other in the middle of the intersection as a result of their own ignorance or negligence to keep an eye on what’s happening behind them.

 

Assess the damage

If the fender popped out, you may be able to pop it back in. If not, you’ll need to pull the dent out of the metal. You can do this by using a plunger or other utensil that can bend metal and place it over the top of the dent. Then use your knee or foot on top of the plunger and push down into the dent with as much force as possible. Continue pushing until either you cannot push any further or it appears that you have removed all of the depth from the hole. Then use your hands to smooth out any sharp edges or creases in the metal, which should now resemble how it was before.

 

Choose the right tools

The first step in fixing a fender bender is choosing the right tools for the job. Ideally, you’ll need a metal file, an 8mm drill bit, and some WD-40. You might also want to buy new screws that are designed specifically for plastic or metal. However, if you don’t want to spend any money on tools, you can use old credit cards or keys as substitutes.

 

Follow the instructions

The best way to pull out a small, shallow dent is with a plunger. First, wet the plunger head with soapy water. Then place the plunger over the area of the dent and apply pressure. Push down and pull up repeatedly until you see the dent come out. If this doesn't work, try using boiling water instead of soapy water. Fill a pot or large pot with boiling water then dip the head of your plunger in it before you press it against your car's fender. Boiling water can expand metal molecules and sometimes make pulling out dents easier. For larger dents, use other tools that are designed for prying or pulling out dents from cars like a rubber mallet or claw hammer.

 

Take your time

If you want to get rid of a dent in your car, the first step is to assess the damage. If the dent is small and close enough to the surface, it’s easy to pop it out by using your hands. You can also take an unbent coat hanger, straighten it out and make a U-shape with one end pointed down. Lay that end on top of the dent and push up with both hands on either side of the hole until you feel it pop out. If that doesn’t work, you can try pouring hot water over the affected area for about 15 seconds before drying off and popping it again. This should take care of any residue that was preventing the metal from going back into shape.

 

Check your work

Fixing a fender is easy, and all you need is some liquid soap and water. Check out the how-to video below for details on how to pull a dent out of your car’s metal or plastic body. You can also use this method on any other surface made of metal or plastic, such as an old chair or garbage can. If your chair or trash can has been in the sun for a while, you may want to wear gloves when you remove the dent.

Fixing dents in your car's body is as easy as using some liquid soap and water!

I hope your all doubts on how to fix fender dent have cleared. If you are still stuck somewhere then you can get detailed information from autovehicleparts.