Simpson Strong-Tie CJT6ZL Concealed Joist Ties

The Simpson Strong-Tie CJT6ZL is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT6ZL long (4-3/4") pins can be used with 5-1/8" Glulam Beams or 6x sawn lumber.Get more news about cjt connector,you can vist our website!
Warning: This connector requires special attention to ensure correct installation. The beam must be installed perpendicular to the support member. The connection's components may be damaged if the beam is rotated from its opposite end during or after installation. Damaged components may not be noticeable and may reduce the connector's load carrying capacity.
ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185 coating) than the standard hot-dip galvanized coating (galvanized per ASTM A653 with a G90 coating). This thicker coating is available on select Simpson Strong-Tie connectors. Due to this increased galvanized thickness these connectors would be expected to have a longer service life than standard galvanized connectors.
If there are any items on the Simpson Strong-Tie Website that you do not see on the DHC Supplies website we will gladly special order them. Most special order Simpson items ship the same or next business day. Call us at 800-323-2999 for pricing and availability.

Important: Selecting USPS as a shipping method for any Simpson Strong-Tie product may delay shipping 1-2 days. Additionally, international shipments may also be delayed 1-2 days.

 

Possible Free Shipping! Orders (Continental USA Only) of Simpson Strong-Tie items only that total $1850.00 or more may ship free depending on location, type of business and the type of Simpson products required. Additional products will be charged standard shipping if applicable. Please call 800-323-2999 to see if your order qualifies.