Brother printers are known for their reliability and high-quality output, but occasionally, users may encounter connectivity issues, particularly when trying to connect to a Wi-Fi network. This step-by-step guide aims to help you troubleshoot and resolve the problem of your brother printer not connecting to wifi, ensuring you can get back to seamless printing in no time.

Step 1: Verify Network Stability Before diving into troubleshooting, ensure that your Wi-Fi network is stable and operational. Check if other devices can connect to the network without any issues. If your Wi-Fi is working fine for other devices, proceed to the next steps.

Step 2: Restart the Printer A simple restart can often resolve connectivity problems. Power off your Brother printer, unplug it from the power source, wait for about 30 seconds, and then plug it back in. Power it on and see if it connects to the Wi-Fi network.

Step 3: Check Signal Strength Printer connectivity can be affected by weak Wi-Fi signals. Ensure that the printer is within a reasonable range of your Wi-Fi router. If your printer is too far away, consider moving it closer to improve signal strength.

Step 4: Reboot Router Sometimes, the router may need a restart to establish proper connections. Turn off the router, wait for a minute, and then power it back on. Allow a few minutes for the router to fully restart, and then attempt to connect your printer again.

Step 5: Verify Network Name and Password Double-check that you are entering the correct Wi-Fi network name (SSID) and password during the printer setup. Make sure there are no typos or errors. If needed, you can find this information on your router or contact your network administrator.

Step 6: Disable MAC Address Filtering Some routers use MAC address filtering to control access to the network. If your printer's MAC address is not added to the allowed list, it won't connect. Temporarily disable MAC address filtering on your router, connect the printer, and then re-enable filtering with the printer's MAC address added to the list.

Step 7: Reset Network Settings on the Printer If the printer has previous network settings that are causing issues, you can reset its network settings. Refer to your printer's manual or online resources to find instructions on how to perform a network reset. After resetting, set up the Wi-Fi connection again.

Step 8: Update Firmware and Drivers Outdated firmware and drivers can lead to compatibility issues. Visit the Brother support website and check if there are any firmware updates or driver updates available for your printer model. Download and install the updates as needed.

Step 9: Disable VPN or Proxy If you're using a VPN or a proxy server on your device, it might interfere with the printer's ability to connect to the Wi-Fi network. Temporarily disable these services and attempt to connect the printer.

Step 10: Contact Brother Support If you've tried all the steps above and your Brother printer still won't connect to Wi-Fi, it's time to reach out to Brother's customer support. They can provide specific guidance and solutions based on your printer model and the nature of the connectivity issue.

Conclusion:

how to connect brother printer to computer :- Dealing with a Brother printer that won't connect to Wi-Fi can be frustrating, but by following these step-by-step solutions, you can identify and resolve the problem. Whether it's a simple reboot, checking network settings, or updating firmware, these troubleshooting steps should help you regain your printer's wireless functionality and ensure smooth and hassle-free printing.